The SFP ERGON series is composed of automatic machines for the continuous packaging of loose containers and already made packs in shrink film (thickness between 10 and 30 microns).
The packers from the SFP ERGON series can achieve an output rate up to 30 packs per minute in single lane and make packs in 1 x ... and 2 x …
These shrink wrappers stand out for the low energy consumption, since they are not equipped with a shrink tunnel, and for the stable and resistant packaging, ensured by the application of the two film webs in a criss-cross pattern and the space between the packs.
SFP 30 ERGON
1In the machine infeed zone, an oscillating guiding system accurately lines up the loose containers carried by a conveyor belt featuring low-friction chains made of thermoplastic material. In the pack formation zone, the containers are clustered in the required format through a pneumatic separator and compensation bars
2The film unwinding is controlled by brushless motors (one for each reel) and the constant film tensioning is controlled by a progressive brake
3The film webs are applied in a criss-cross pattern around the containers in transit: the first reel wraps the group of containers in a clockwise direction, while the second one wraps it in a counter-clockwise direction, thus realizing a resistant and long lasting pack
4The cutting operation is carried out in two steps (at the front and back of the pack in transit) through horizontal movements of a resistance-heated vertical blade, controlled by a brushless motor
Machine bearing frame made of sand-blasted and powder-painted steel
Max. pack size 400 mm H x 400 mm L x 400 mm LS (Leading Side) (according to the product) Min. pack size 100 mm H x 200 mm L x 100 mm LS (Leading Side) (according to the product)
Sliding protection doors in anodised aluminium featuring a rounded shape which let all the motors (featuring low energy consumption) be placed externally if compared to the mechanical groups they activate.
The closing system of doors is equipped with a slow-down device, which accompanies the door smoothly in its final phase of closure
Absence of gearboxes and prevailing employment of ICOS brushless motors equipped with digital servo-driver integrated into the motor
For life lubricated bearings
Infeed conveyor with chains made of thermoplastic material featuring low friction coefficient and a motorized system of oscillating laning guides
Interactive 7'' touchscreen display (15'' model mounted on an arm sliding on rail available as an option)
Reduced size and great quality-price ratio
The SFP ERGON shrink wrappers have very reduced dimensions since they are not equipped with a shrink tunnel, thus representing the ideal solutions to meet the requirements of those customers who do not have large plants. Furthermore, the prices of the SFP are very competitive, despite the employment of technologically advanced solutions and high-reliable components.
These machines can package a wide range of products in several pack collations, so as to effectively meet the end user's current and future requirements.
Moreover, each machine can be equipped with additional devices, which increase its basic functions and ensure a high level of customization of the final package.
Motors directly connected to the drive shafts
SMI machines do not include gearboxes: the motors are directly connected to the drive shafts. The consequent advantage is the reduction of maintenance, energy consumption and noise.
Resistant and long lasting packs
Thanks to the application of the two film webs in a criss-cross pattern and to the spacing device creating about 100 mm space between two consecutive groups of containers, the SFP ERGON shrink wrappers allow to realize resistant and long lasting packs.
Since SFP packers have no heat-shrink tunnel, a substantial saving in power consumption can be achieved during the packaging operation.
Furthermore, the consumption of packaging material is 30/40 % lower than
traditional shrink wrappers.
Easy and cost-saving maintenance
The rounded safety doors enable to have more space inside the machine and thus to install motors externally compared to the mechanical units they drive, which allows the operator to easily perform the activities connected to the plant maintenance.
User-friendly man-machine interface
The POSYC® control panel, fixed or sliding on a boom running the whole length of the machine (depending on the machine model), enables even less expert operators to easily and effectively run the packer, thanks to an intuitive interface, a touch screen display and diagnosis functions and real-time technical support available on the POSYC®.
Data provided are not binding, as they have to be confirmed by SMI according to the machine user's production conditions and technical specifications.
The European Regulation 679/2016 (GDPR) on the protection of personal data has been fully applicable since May 25th, 2018. This is an important goal, because it lays down rules relating to the processing of personal data for all Countries within the Union. Every company of the SMI Group planned a series of activities, assets or operational modes to comply with the regulation and put into practice the protection of personal data. Here is a list of actions taken to comply with the European Regulation and our policy on personal data processing.
Lawfulness of processing All activities relating to personal data processing shall be lawful (consent, contract obligations, vital interests of the data subject or of third parties, compliance with legal obligations to which the controller is subject, public interest or exercise of official authority, legitimate interest pursued by the controller or by third parties).
Information document The information statement has been improved and updated to the new regulations (art. 13 and 14 GDPR).
Rights of the data subjects (right of access, right to erasure-right to be forgotten, right to restriction of processing, right to object, right to data portability) Technical and organization measures have been adopted to ensure the data subject's exercise of his rights and to meet the data subject requirements.
Controllers, processors Based on the new principle of “accountability”, SMI Group organization was re-defined, in order to proactively ensure integral compliance with the Regulation. Redefinition of the role of data processors and service suppliers whose activity implies personal data processing.
Risk of data processing; accountability measures taken by controllers and processors (Impact assessment, record of processing activities, security of processing, data breach) The “Conformity document”, including records of data processing activity, plans, adopts and demonstrates all technical and organizational measures taken to adequately perform the data processing activities and specifies the necessary procedures to be adopted to notify data breach.
Transfer of personal data to international organizations Smi Group adheres to the general principles and guarantees concerning the transfer of personal data to third Countries.
The Controller is: SMI S.p.A. Head office: Via Carlo Ceresa, 10 - 24015 San Giovanni Bianco (BG) - ITALIA VAT nr: IT03942700166 - R.E.A. 421708 For further information, write to: email@example.com
According to the European Regulation 679/2016, the data subject is entitled to exercise the rights set forth in the Regulation. The integral version of art. 15; 16; 17; 18; 20; 21; 77 of the European Regulation is attached to this document.
SMI S.p.A. IVA SMI INDUSTRIES Group Headquarters: Via Carlo Ceresa, 10 - 24015 San Giovanni Bianco (BG) - ITALIA Registered office: Via Monte Grappa, 7 - 24121 Bergamo (BG) - ITALIA VAT: 04471940165 - TAX code: 03942700166 - R.E.A.: 421708 Share capital: Euro 5.000.000 i.v.