Starting from the countless technical innovations introduced on the ERGON EBS series stretch-blow moulders, SMI designers have developed a new series of ultra-compact, fully electronic, rotary stretch-blow moulders called ERGON EBS K (the letter K of the name comes from the German word "kompakt").
Capable of satisfying production demands of up to 9,200 bottles/hour, the new models are available in 2, 3 and 4-cavity versions, and offer all the advantages of rotary technology in a "speed" range (up to 9.200 bottles/hour), traditionally occupied by linear stretchblow moulders.
The EBS K ERGON series of rotary stretch-blow moulders ensures high performances in the stretch-blow moulding of PET, rPET and PP bottles, mainly used in the “food & beverage” sector; thanks to high-tech components, minimized maintenance and operational costs and excellent quality/price ratio, the EBS K ERGON series is the ideal solution for the production of plastic containers of different capacities, featuring various shapes, from the simplest to the most sophisticated ones.
EBS 2 K ERGON
EBS 3 K ERGON
EBS 4 K ERGON
Max. output (BPH)
min Ø = 44 mm max Ø = 120 mm
min Ø = 44 mm max Ø = 120 mm
min Ø = 44 mm max Ø = 120 mm
1Preforms feeding The preforms are transferred from the hopper to the unscrambler through a lifting belt; the unscrambler conveys them to an inclined guide, from where they reach the spacing star wheel at the heating module infeed, by gravitational fall. The star wheel feeds the rotary mandrel chain, through which the preforms are “captured” and let into the heating module.
2Preforms heating Before entering the heating module, equipped with infrared lamps, each preform undergoes accurate checks, which detect its size and vertical position and automatically eliminate the preforms not compliant with the pre-set parameters. The preforms, supported by the mandrels, start moving along the heating module. During the heating process, the preforms constantly turn around themselves, so as to ensure an excellent and symmetrical heat distribution. The heating module is equipped with two different cooling systems: a liquid-fed cooling system, in order to cool the protection ring preventing the preforms thread deformation during the heating process; an air-fed cooling system, in order to keep the temperature inside the heating module as low as to avoid the exposure of the preforms outside walls to too high temperatures. At the heating module outlet, a sensor detects the preform temperature and compares it with the temperature set point; if the two values do not correspond, it increases or decreases the heating module lamps power.
3Preforms stretch-blow moulding A special rotary group of grippers picks up the preforms from the oven and sets them into the stretch-blowing stations. The stretch-blowing process includes two phases: - stretching and pre-blowing, which occur simultaneously through the descent of the motorized stretching rod and the supply of low-pressure compressed air; - final blowing with high-pressure compressed air, through which the containers take their final shape. A counter-pressure air system ensures the perfect locking of the moulds, whereas the mechanical locking of the mold-holders allows bearing the strengths generated by the stretch-blow moulding process with the maximum reliability. Also the stretch-blowing stations are equipped with a liquid-fed cooling system, which keeps the molds temperature constant.
4Bottles outlet During the blowing process, an accurate measurement system checks that the process follows the pression profile required. In fact, a pressure drop would alter the container shape which would cause the automatic rejection of the container. The finished bottles are picked from the stretch-blowing stations by another rotary group of grippers and put onto an air conveyor which finally transfers them to the filling machines.
The preform heating section (tunnel) is integrated with the stretch-blow moulding section (carousel) into a single, extremely compact module, that makes the system suitable for installation even on small bottling lines
The structure that contains the tunnel and the carousel is equipped with slightly rounded safety doors, providing more space inside the machine to perform cleaning and maintenance operations easily and safely
The carousel of the stretch-blow moulder is equipped with motorized stretch rods controlled by electronic drives and do not require mechanical cams
Innovative technology that makes it possible to change the stretch speed without mechanical intervention (switching cams) and to considerably reduce the vibration stress on the blowing carousel compared to traditional solutions
The stretch-blow moulding system uses high-performance, low deadvolume valves that reduce pre-blowing and blowing times, hereby improving efficiency and the quality of the bottles produced
The mould mechanical unit is equipped with its own motorization, which ensures the utmost precision for the up/down motion of the mould bottom and the opening/closing of the mould-holder unit
Very competitive quality-price ratio
The preform heating section (tunnel) is integrated with the stretch-blow moulding section (carousel) into a single, extremely compact module, that makes the system suitable for installation even on small bottling lines.
Rotary stretch-blow moulding system
High-efficiency rotary stretch-blow moulding system equipped with motorized stretch rods, whose functioning, controlled electronically, does not need pneumatic cams. This allows a precise management of the rod path and an accurate control of its position, as well as a significant energy saving.
High quality of the bottles produced
The stretch-blow moulding system uses high-performance low dead volume valves, that allow to reduce pre-blowing and blowing times, with advantages in terms of machine performance and quality of the bottles produced.
Reduced energy consumption
Thanks to the preform heating module, equipped with high-energy efficiency IR lamps, and to the stretch-blow moulding module equipped with a double stage air recovery system, energy costs related to the production of high-pressure compressed air are reduced.
Safe and easy cleaning and maintenance operations
SMI stretch-blow moulders, characterized by a compact and ergonomic structure, are equipped with slightly rounded safety doors; this allows to have more space inside the machine in order to carry out cleaning and maintenance operations easily and safely.
Optimized automation and control
The plant is controlled by Motornet System® automation and control technology that ensures the constant maintenance of optimum parameters during the whole production cycle and the direct change of the machine settings, thus simplifying the format changeover operations.
* Data provided on this page are not binding, as they have to be confirmed by SMI according to the machine user's production conditions and technical specifications.
The European Regulation 679/2016 (GDPR) on the protection of personal data has been fully applicable since May 25th, 2018. This is an important goal, because it lays down rules relating to the processing of personal data for all Countries within the Union. Every company of the SMI Group planned a series of activities, assets or operational modes to comply with the regulation and put into practice the protection of personal data. Here is a list of actions taken to comply with the European Regulation and our policy on personal data processing.
Lawfulness of processing All activities relating to personal data processing shall be lawful (consent, contract obligations, vital interests of the data subject or of third parties, compliance with legal obligations to which the controller is subject, public interest or exercise of official authority, legitimate interest pursued by the controller or by third parties).
Information document The information statement has been improved and updated to the new regulations (art. 13 and 14 GDPR).
Rights of the data subjects (right of access, right to erasure-right to be forgotten, right to restriction of processing, right to object, right to data portability) Technical and organization measures have been adopted to ensure the data subject's exercise of his rights and to meet the data subject requirements.
Controllers, processors Based on the new principle of “accountability”, SMI Group organization was re-defined, in order to proactively ensure integral compliance with the Regulation. Redefinition of the role of data processors and service suppliers whose activity implies personal data processing.
Risk of data processing; accountability measures taken by controllers and processors (Impact assessment, record of processing activities, security of processing, data breach) The “Conformity document”, including records of data processing activity, plans, adopts and demonstrates all technical and organizational measures taken to adequately perform the data processing activities and specifies the necessary procedures to be adopted to notify data breach.
Transfer of personal data to international organizations Smi Group adheres to the general principles and guarantees concerning the transfer of personal data to third Countries.
The Controller is: SMI S.p.A. Head office: Via Carlo Ceresa, 10 - 24015 San Giovanni Bianco (BG) - ITALIA VAT nr: IT03942700166 - R.E.A. 421708 For further information, write to: email@example.com
According to the European Regulation 679/2016, the data subject is entitled to exercise the rights set forth in the Regulation. The integral version of art. 15; 16; 17; 18; 20; 21; 77 of the European Regulation is attached to this document.
SMI S.p.A. IVA SMI INDUSTRIES Group Headquarters: Via Carlo Ceresa, 10 - 24015 San Giovanni Bianco (BG) - ITALIA Registered office: Via Monte Grappa, 7 - 24121 Bergamo (BG) - ITALIA VAT: 04471940165 - TAX code: 03942700166 - R.E.A.: 421708 Share capital: Euro 5.000.000 i.v.