The integrated system of stretch-blow moulding, filling and capping featured by SMI ECOBLOC® K ERGON EV series combines the functions of an EBS K compact rotary stretch-blow moulder, of an electronic rotary filler and of a rotary capper.
The ECOBLOC® K ERGON integrated system stands out for:
ultra-compact modular frame, with a wide choice of customization options;
latest technology innovations adopted in the machine design;
perfect synchronization between the “dry” environment of the stretch-blow moulding module and the “wet” environment of the filling module;
minimum number of transfer star wheels, as the stretch-blow moulding module and the filling/capping module stand ”back to back”, with no need for connecting conveyors;
operating and maintenance costs dramatically cut;
outstanding price/quality ratio.
SMI's ECOBLOC® K ERGON series models are the ideal solution for manufacturing, filling and capping PET, PEN and PP containers of many different sizes and shapes, from the simplest to the most complex and innovative. Combining stretch-blow moulding, filling and capping in one single machine offers major economic benefits:
no need for a rinser, accumulation conveyors and conveyors between the blower and the filler;
virtual elimination of container contamination risks;
considerable reduction of line inefficiency causes;
All models are equipped with an innovative bottle transfer system, minimizing the risks of product contamination and increasing the machine’s overall performance; ECOBLOC® K ERGON integrated systems can be employed in the bottling lines of the following products:
FLAT WATER and MILK (EV Models)
ECOBLOC® K ERGON EV
Max. output (BPH)
1Preforms feeding The preforms are transferred from the hopper to the unscrambler through a lifting belt; the unscrambler conveys them to an inclined guide, from where they reach the spacing star wheel at the heating module infeed, by gravitational fall. The star wheel feeds the rotary mandrel chain, through which the preforms are “captured” and let into the heating module.
2Preforms heating Before entering the heating module, equipped with infrared lamps, each preform undergoes accurate checks, which detect its size and vertical position and automatically eliminate the preforms not compliant with the pre-set parameters. The preforms, supported by the mandrels, start moving along the heating module. During the heating process, the preforms constantly turn around themselves, so as to ensure an excellent and symmetrical heat distribution. The heating module is equipped with two different cooling systems: a liquid-fed cooling system, in order to cool the protection ring preventing the preforms thread deformation during the heating process; an air-fed cooling system, in order to keep the temperature inside the heating module as low as to avoid the exposure of the preforms outside walls to too high temperatures. At the heating module outlet, a sensor detects the preform temperature and compares it with the temperature set point; if the two values do not correspond, it increases or decreases the heating module lamps power.
3Empty bottles transfer After being manufactured by the stretch-blow moulding machine of the EBS K ERGON, empty bottles are conveyed from the blower to the filler by "neck-handling" direct transfer through a starwheel-starwheel system. The star-wheel at the blowmoulder outlet is equipped with grippers electronically synchronised with the brackets of the starwheel at the filler inlet.
4Preforms stretch-blow moulding A special rotary group of grippers picks up the preforms from the oven and sets them into the stretch-blowing stations. The stretch-blowing process includes two phases: - stretching and pre-blowing, which occur simultaneously through the descent of the motorized stretching rod and the supply of low-pressure compressed air; - final blowing with high-pressure compressed air, through which the containers take their final shape. A counter-pressure air system ensures the perfect locking of the moulds, whereas the mechanical locking of the mold-holders allows bearing the strengths generated by the stretch-blow moulding process with the maximum reliability. Also the stretch-blowing stations are equipped with a liquid-fed cooling system, which keeps the molds temperature constant.
5Electronic filling A sensor detects the presence of the bottle at the filler inlet; the filling process starts only if a bottle is detected. The product to be bottled is fed from a small external tank to the filling valves by means of a pump or by gravity in the case of foam products. The filling process is electronic volumetric with magnetic flow-meters (EV models for conductive products) or electronic massic with mass meters based on the Coriolis' principle (EM models for nonconductive products). A flowmeter positioned upstream of each filling valve gauges the amount of product flowing through. The flow amount is gauged by pulses-counting: upon reaching the set amount of pulses for the current format, a signal is sent to the filling valve to be closed.
6Pick & place capping system Full bottles are transferred to the capper by means of a star-wheel equipped with grippers. Caps are oriented in the correct position by a hopper-unscrambler standing outside the machine at an easy-access height, and are transferred to a pick & place device positioning the cap under the capping head, which moves downwards and applies the cap on the bottle.
7Bottles outlet During the blowing process, an accurate measurement system checks that the process follows the pression profile required. In fact, a pressure drop would alter the container shape which would cause the automatic rejection of the container. The finished bottles are picked from the stretch-blowing stations by another rotary group of grippers and put onto an air conveyor which finally transfers them to the filling machines.
ultra-compact modular frame, offering a wide array of customization options;
perfect separation between the “dry” environment of the stretchblow moulding module and the “wet” environment of the filling module;
direct bottle transfer by means of adjoining star-wheels (neckhandling style with pitch circle diameter);
the integrated system – excluding both rinser and connecting conveyors – drives down energy and water consumption;
dramatic cutback of TCO;
use of eco-friendly technologies, for the safeguard of the environment;
high cleanliness and hygiene standards;
excellent quality-price ratio.
The filling module
ECOBLOC® K ERGON integrated systems employ exclusively state-of-the-art filling technologies, with the following benefits:
fully electronic management of the filling cycle;
filling parameters selection from the operator panel, according to product, container, speed;
simple-design, ready-to-clean filling valves;
easy and quick format changeover, with no need to replace mechanical components.
Electronic volumetric filling: ECOBLOC® K ERGON EV/EM: FLAT LIQUIDS
magnetic flow-meters, for flat conductive products (> 30 uS/ cm), such as STILL WATER and MILK;
massic flow-meters, for flat nonconductive products (< 30 uS/ cm), such as STILL WATER and EDIBLE OIL;
The flowmeter gauges the quantity of product (volume or mass) flowing through the pipe feeding the filling valve and turns it into pulses.
Upon reaching a given number of pulses, the filling process stops.
The capping module
high precision system, for the application of screw caps and pressure caps;
external cap feeding hopper;
shorter intervention time in case of cap jamming;
water-fall cap feeder-orienter (optional) which delivers caps conveniently oriented to the feeding channel;
no more centrifugal hopper with relevant cap jamming hazard (optional);
no more air thrust (optional).
* Data provided on this page are not binding, as they have to be confirmed by SMI according to the machine user's production conditions and technical specifications.
The European Regulation 679/2016 (GDPR) on the protection of personal data has been fully applicable since May 25th, 2018. This is an important goal, because it lays down rules relating to the processing of personal data for all Countries within the Union. Every company of the SMI Group planned a series of activities, assets or operational modes to comply with the regulation and put into practice the protection of personal data. Here is a list of actions taken to comply with the European Regulation and our policy on personal data processing.
Lawfulness of processing All activities relating to personal data processing shall be lawful (consent, contract obligations, vital interests of the data subject or of third parties, compliance with legal obligations to which the controller is subject, public interest or exercise of official authority, legitimate interest pursued by the controller or by third parties).
Information document The information statement has been improved and updated to the new regulations (art. 13 and 14 GDPR).
Rights of the data subjects (right of access, right to erasure-right to be forgotten, right to restriction of processing, right to object, right to data portability) Technical and organization measures have been adopted to ensure the data subject's exercise of his rights and to meet the data subject requirements.
Controllers, processors Based on the new principle of “accountability”, SMI Group organization was re-defined, in order to proactively ensure integral compliance with the Regulation. Redefinition of the role of data processors and service suppliers whose activity implies personal data processing.
Risk of data processing; accountability measures taken by controllers and processors (Impact assessment, record of processing activities, security of processing, data breach) The “Conformity document”, including records of data processing activity, plans, adopts and demonstrates all technical and organizational measures taken to adequately perform the data processing activities and specifies the necessary procedures to be adopted to notify data breach.
Transfer of personal data to international organizations Smi Group adheres to the general principles and guarantees concerning the transfer of personal data to third Countries.
The Controller is: SMI S.p.A. Head office: Via Carlo Ceresa, 10 - 24015 San Giovanni Bianco (BG) - ITALIA VAT nr: IT03942700166 - R.E.A. 421708 For further information, write to: firstname.lastname@example.org
According to the European Regulation 679/2016, the data subject is entitled to exercise the rights set forth in the Regulation. The integral version of art. 15; 16; 17; 18; 20; 21; 77 of the European Regulation is attached to this document.
SMI S.p.A. Sede amministrativa: Via Carlo Ceresa, 10 - 24015 San Giovanni Bianco (BG) - ITALIA Sede legale: Via Monte Grappa, 7 - 24121 Bergamo (BG) - ITALIA C.F. e P. IVA IT03942700166 - R.E.A. 421708 Capitale Sociale Euro 5.000.000 i.v.