AFW ERGON Series
LSK ERGON Series
LSK SF ERGON Series
CSK ERGON Series
ASW ERGON Series
SK ERGON Series
SFP ERGON Series
TF ERGON Series
MP ERGON Series
TPP ERGON Series
ACP ERGON series
LWP ERGON Series
CWP ERGON Series
WP ERGON Series
LCM ERGON Series
CM ERGON Series
CM FP ERGON Series
DV ERGON series
The new ERGON range of automatic packers is based on design choices inspired by key concepts such as ergonomics, technology, sturdiness and modularity, masterfully blended to mark a new, significant evolution in the history of SMI products.
You can point out the new ERGON packers rather quickly due to the rounded profile of the movable safety guards, which allow to house all the motors on the outside with respect to the mechanical units they run, facilitating line operator access when performing maintenance.
The CM FP ERGON series includes automatic machines gathering into a single unit the functions of a wrap-around case packer and of a shrink wrapper, for the packaging of plastic, metal, cardboard or glass containers in the following package types: cardboard case; cardboard pad + film (only for stable products); cardboard tray + film; cardboard tray without film; film only.
Trays can be octagonal or rectangular, with walls having either the same height or different heights.
CM FP ERGON series machines can achieve an output up to 80 packs per minute, according to the machine model, the product kind and the selected format. The pack collations can vary according to the containers shape and dimensions; in general, the most requested collations are: 2x3, 3x4 and 4x6 for wrap-around cases and 4x3 and 6x4 for tray + film packs.
All CM FP ERGON packers are equipped with an electronic grouping system, manual format changeover and with the “Easy-Load” system to automatically load the cardbord blank magazine.
The blanks magazine capacity can be increased through modular expansion units.
|CM 400 FP ERGON||CM 500 FP ERGON||CM 600 FP ERGON||CM 800 FP ERGON|
|Size (mm)||18550 x 1940 x 2950||19550 x 1940 x 2950||21310 x 1940 x 2950||22310 x 1940 x 2950|
1On the machine's inlet conveyor belt, featuring low-friction chains made of thermoplastic material, a specific group of motorized oscillanting guides accurately lines up the loose containers moving towards the pack formation zone, where the containers are clustered in the selected format through electronically synchronized fingers, operating in continuous motion.
2The new Easy-Load system automatically loads cardboard blanks into the dedicated blank magazine of the machine. The new loading device is made up of a group of motorized mat-equipped conveyor belts on which the operator easily places the cardboard blanks in uniform horizontal stacks.
3A corrugated cardboard blank is picked from the blanks magazine by a newly designed picker equipped with vacuum suction cups; it moves along the blank climb and places itself underneath the group of products in transit. The products move on with the short side leading (wrap-around case) or with the long side leading (tray).
4In the tray/case former, the cardboard blank is folded and wrapped around the products by special guides. Then the flap folding devices fold the blank’s side flaps and finally the upper/lower flaps of both the front and back side of the pack. The hot melt glue sealing ensures an excellent resistance of the pack.
5If requested, the film can be wrapped around the tray and superposed at the pack base; the pack finally enters the shrinking tunnel. The unwinding of the film reels, situated in the lower part of the machine, is controlled by brushless motors, in order to ensure a constant tension of the film.
The innovative “Easy-Load” system allows the automatic loading of the cardboard blanks magazine and features considerable advantages from an operating and functional point of view; in fact, the operator can easily load the cardboard blanks, stacked horizontally in uniform groups, because the feeding belt of the cardboard blanks magazine is positioned at the same working height as the packer's infeed belt, rather than under it.
More in detail, the new system patented by SMI is made up of a series of conveyor belts, fitted with motorized mats, which feed the packer's cardboard blanks magazine; the cardboard blank stacks are carried on these belts up to the area in which they are translated and then continue up to the collection system at case/shrink packer infeed.
Thanks to specific sensors, the layout and feed of the cardboard blanks on the conveyor belts fitted with the motorized mats and their loading into the packer's magazine is, in fact, fully automated.
Therefore, the innovative solution devised by SMI eliminates the disadvantages related to the traditional loading of the cardboard blanks magazine, which force the operator to bend his/her body continuously to place the blanks in the bottom part of the machine.
The technology used in the "Easy-Load" magazine also features the great advantage of ensuring fluid and constant picking operations with a wide range of cardboard blanks having a thickness between 0.5 mm and 5 mm.
The TS stacks on two or more layers clusters of plastic, metal , cardboard or glass containers both clustered in cardboard trays or pad and loose (this latter solution solely for fit-in type cans). This device can be installed on all SMI packers, with the exception of MP series.
It consists of an electronic stacking device operating in continuous motion, which achieves an output rate up to 60 packs per minute according to the machine model and to the product handled.
Pack collations can vary according to the container shape, capacity and size; in general, the most requested collations are: 4x3 and 6x4. It is available both for single and for double lane production.
After coming out of the trayformer, two or more packs are stacked by means of a Cartesian coordinate system.
Before the pack enters the shrinking tunnel, the film is wrapped around the products and overlapped at the base of the pack.
The PID SBP® inserts stretched board pre-assembled partitions into cardboard boxes, in order to protect fragile products (such as glass containers) and save their labels from abrasions.
This device can be installed on the WP wrap-around case packers and on the CM combined packers.
Compared with the traditional inserting systems of non-preassembled partitions, the PID SBP® allows to:
The PID SBP® and the pre-assembled partitions magazine are mounted at the machine inlet, on top of the pack-forming section. The maximum operating speed is 40 packs/minute (1-head model) or 60 packs/minute (2-head model).
A mechanical arm equipped with vacuum suckers picks a stretched board pre-assembled partition from the partition magazine, opens it and lowers it between the products that have just been grouped in the required pack collation.
Finally a cardboard blank is wrapped around the products by means of special guides, thus forming a case.
Data provided are not binding, as they have to be confirmed by SMI according to the machine user's production conditions and technical specifications.
© SMI S.p.A. 2023
Privacy statement - Legal notice
The European Regulation 679/2016 (GDPR) on the protection of personal data has been fully applicable since May 25th, 2018. This is an important goal, because it lays down rules relating to the processing of personal data for all Countries within the Union. Every company of the SMI Group planned a series of activities, assets or operational modes to comply with the regulation and put into practice the protection of personal data. Here is a list of actions taken to comply with the European Regulation and our policy on personal data processing.
Lawfulness of processing
All activities relating to personal data processing shall be lawful (consent, contract obligations, vital interests of the data subject or of third parties, compliance with legal obligations to which the controller is subject, public interest or exercise of official authority, legitimate interest pursued by the controller or by third parties).
The information statement has been improved and updated to the new regulations (art. 13 and 14 GDPR).
Rights of the data subjects (right of access, right to erasure-right to be forgotten, right to restriction of processing, right to object, right to data portability)
Technical and organization measures have been adopted to ensure the data subject's exercise of his rights and to meet the data subject requirements.
Based on the new principle of “accountability”, SMI Group organization was re-defined, in order to proactively ensure integral compliance with the Regulation.
Redefinition of the role of data processors and service suppliers whose activity implies personal data processing.
Risk of data processing; accountability measures taken by controllers and processors (Impact assessment, record of processing activities, security of processing, data breach)
The “Conformity document”, including records of data processing activity, plans, adopts and demonstrates all technical and organizational measures taken to adequately perform the data processing activities and specifies the necessary procedures to be adopted to notify data breach.
Transfer of personal data to international organizations
Smi Group adheres to the general principles and guarantees concerning the transfer of personal data to third Countries.
The Controller is:
Head office: Via Carlo Ceresa, 10 - 24015 San Giovanni Bianco (BG) - ITALIA
VAT nr: IT03942700166 - R.E.A. 421708
For further information, write to: email@example.com
According to the European Regulation 679/2016, the data subject is entitled to exercise the rights set forth in the Regulation.
The integral version of art. 15; 16; 17; 18; 20; 21; 77 of the European Regulation is attached to this document.
In order to exercise your rights, please send the application form duly filled in to the Controller's address.
IVA SMI INDUSTRIES Group
Headquarters: Via Carlo Ceresa, 10 - 24015 San Giovanni Bianco (BG) - ITALIA
Registered office: Via Monte Grappa, 7 - 24121 Bergamo (BG) - ITALIA
VAT: 04471940165 - TAX code: 03942700166 - R.E.A.: 421708
Share capital: Euro 5.000.000 i.v.