The APS 1035 P is a single-column palletisation system based on two Cartesian axes motion, with upward movements. The vertical axe is composed of a hard-set vertical column along which a horizontal beam runs on recirculating-sphere guides. The horizontal axe of operation is made up of the beam, along which, again on recirculating-sphere guides, a picking gripper-bearing arm moves.
The picking gripper lifts the pack rows from a conveyor belt positioned at waist height and, with swift and precise movements, places them on the pallet in the desired spot. The beam’s vertical motion and the gripper-bearing arm’s horizontal motion are driven by brushless motors, which ensure perfect trajectories during the whole palletisation process.
The system is equipped with a pad magazine and an interlayer pad-inserting device which inserts a flat cardboard pad in-between the pallet layers.
Output rate: up to 35 packs/minute.
APS 1035 P
Swift and precise movements
The central column is actuated by brushless motors, which guarantee highly dynamic, reliable and precise movements of all axes of operation.
The employment of this technology within palletisation systems, which are characterized by repetitive actions, turns into higher reliability, fewer maintenance operations and lower operating costs.
The machine automation and control are entrusted to the innovative Sercos Fieldbus technology, featuring an intuitive user interface for quick and easy management of end-of-line palletising operations. A touch-screen display with advanced graphics and a complete array of utilities for real-time machine diagnosis and technical support further enhance the machine control features. In addition to that, the HMI will display automatically all possible palletisation patterns just by entering the pack size and specifications, and the number of layers required.
Robustness and reliability
The accurate design of the column and of the horizontal beam, along with the creeping on recirculating-spheres skids, ensures fluid and uninterrupted movements, with nearly no dynamic buckling and virtual absence of vibrations: this is the key factor to be able to guarantee a lengthy life cycle of the mechanical components.
The APS range of SMI palletisers is equipped as a base supply with the brand-new dedicated “safety PLC”, which allows to program all protection systems in a flexible, reliable and efficient manner. The PLC monitors the accurate functioning of all safety devices, integrating their performances, for a safe intersection between areas of handling inside the machine perimeter. This system enables to dramatically reduce machine downtimes, both in an emergency and during the pallet loading operation, the cardboard sheet loading operation, etc., thanks to dedicated solutions for each area of intervention. Maintenance operations are simple and easy, and the palletising systems adaptation to future safety rules will be quick and troublefree as just an upgrade of the PLC software will be required.
Low operating costs and slashed maintenance
APS palletising systems easily integrate into existing packaging lines or into new plants and can be set in motion immediately, since each single module composing the palletiser, conceived as an independent unit, is connected through a network to the central body. Thanks to this designing feature, each module is assembled, pre-cabled and tested at SMI production plant, thus minimizing assembly and start up operations at the customer’s site. For example, the central body can be easily disassembled, conveyed or stored in a small room, and later re-assembled and set in motion again in
less than 5 hours. The mechanical simplicity, the employment of robot-based components and the structural optimization allow a remarkable reduction of the maintenance costs and of the energy consumption, as well as the extension of the
machine life cycle.
Single-lane infeed with simple preformation
Layer-forming system with a single-entry infeed including 1 double rubberized cadencing belt and 1 line/layer-forming product infeed belt
The system, designed in accordance with FCR (Full Cost Reduction) methodologies, is tested in SMI factory and is supplied to the client fully assembled and cabled.
The start-up consists of connecting the connectored cable of signals, power and sercos to the central module of the APS.
Fixed column with picking grip
Single column based on two Cartesian axes motion, along which a horizontal beam runs vertically on recirculating-sphere guides.
The horizontal axe of operation is made up of the beam, along which, again on recirculating-sphere guides, the picking grip.
The grip picks the pack rows up from a conveyor belt positioned at waist height and, with swift and precise movements, deposits them on the pallet in the desired spot.
Vertical and horizontal motions are driven by brushless motors, which ensure perfect trajectories during the whole palletisation process.
Pad magazine and interlayer pad-inserting device
Pad magazine adjustable in accordance with the interlayer pad dimensions.
Controlled-axis (brushless) padinserting group, composed of a fixed column with vertical lifting of the translating arm. Suction-cup gripping system with from 4 to 8 adjustable points, which ensures the accurate lifting of any kind of interlayer pad. The system is tested in SMI factory and is supplied to
the client fully assembled and cabled. Designed in accordance with FCR (Full Cost Reduction) methodologies, this accessory device is controlled by the electrical cabinet of the APS central module. Start-up time is really short, since you just have to connect the connectored cable of signals, power and sercos bus to the central module of the APS.
Adjustable fork magazine for empty pallets, capable of:
1) loading the pallets into the magazine in both directions;
2) releasing the pallet to the line both headways and sideways (both right and left), in order to ensure the layout top flexibility.
The pallet magazine is usually combined with a roller or chain conveyor belt (according to the pallet loading and releasing direction).
Storage capacity: some 12 pallets with standard height (i.e. euro 144 mm).
Pallet roller conveyor
Frame in zinc-coated steel and rollers with 76 mm ø 150 mm pitch, motorised through a 5/8 inch chain.
Electronically reversible central motorization.
The system is tested in SMI factory and is supplied to the client fully assembled and cabled. Available in different lengths: 1500 mm, 2000 mm, 2500 mm and 3000 mm.
* Data provided on this page are not binding, as they have to be confirmed by SMI according to the machine user's production conditions and technical specifications.
In compliance with the Italian Law no. 196 dated June 30, 2003 (Code concerning the protection of personal data), SMI S.p.A. informs you that your personal data will be used by SMI S.p.A. for purposes associated with marketing and business activity only. SMI S.p.A. will treat all the data you provided it with in the utmost secrecy and will be allowed to transmit them for the same purposes to its subsidiary or associate companies only, both in Italy and in those countries where SMI S.p.A. operates, it being understood that these subsidiary or associate companies will adopt equivalent criteria of security and secrecy.
The provision of your personal data is not compulsory; in case of denial, it will not be possible for you to send this form on-line. Moreover, you will be entitled to consult your data and to ask SMI S.p.A. to correct, update and, if applicable, to cancel or block them by writing to SMI S.p.A., Via Carlo Ceresa, 10- 24015 San Giovanni Bianco (BG) - Italy. Any communication is to be addressed to the attention of "the person in charge for the treatment of personal data".
With regard to cookies, our website uses exclusively technical cookies, whose utilization is not aimed at the collection of the user's personal data; it is limited to the transmission of session identification data. Technical cookies allow IT authentication, session monitoring and the memorization of specific information to let the user browse or get a specific service. Technical cookies allow to keep the identification of the user in the course of the session, their memorization is not enduring on the user's device and they are automatically canceled once the browser is closed.
You are kindly requested to attentively read the above mentioned information: by ticking the box below and clicking on the "send" button, you will give SMI S.p.A. your consent to use and transmit your personal data for the purposes related to the declared activity, in compliance with the Italian Law quoted hereinbefore. I have read and understood the above mentioned information and, hence, in compliance with the Italian Law quoted hereinbefore, I give my consent to the use and the transmission of my personal data for the purposes related to the declared activity.
SMI S.p.A. Sede amministrativa: Via Carlo Ceresa, 10 - 24015 San Giovanni Bianco (BG) - ITALIA Sede legale: Via Monte Grappa, 7 - 24121 Bergamo (BG) - ITALIA C.F. e P. IVA IT03942700166 - R.E.A. 421708 Capitale Sociale Euro 5.000.000 i.v.
This web site uses technical cookies; for further information click here close